TECHNICAL SPECIFICATIONS
Engine Specifications
Engine on "2 CV 4"
Engine on "2 CV 6"
French official symbol: Citroën type AZ KB
Cylinders: flat twin opposed
Bore: 68.5 mm
Stroke: 59 mm
Cubic capacity: 435 cc
Compression ratio: 8.5 : 1
Effective HP (DIN): 24 HP at 6,750 rpm
Maximum torque (DIN): 2.95 mkg (21.3 ft.lbs.) at 4,000 rpm
Valve gear:
Exhaust valve stem clearance, when cold: 0,15 to 0,20 mm
Inlet valve stem clearance, when cold: 0,15 to 0,20 mm
Fuel system:
Fuel: Premium
Fuel tank capacity: 20 litres (4.4 imp. gal.)
Carburettor: Solex
Lubrication:
After draining: 2,2 litres (3.9 imp. pints)
Ignition:
Static advance setting: 12° engine
Sparking plugs: Series fitted: Marchal 35 - AC 42 F - Eyquem 755 - Bosch W 225 T1 - Champion
L 85 - Marelli CW 7 N BT
Electrode gap: 0,65 to 0,75 mm (0.026" to 0.030")
French official symbol: Citroën type AZ KA
Cylinders: flat twin opposed
Bore: 74 mm
Stroke: 70 mm
Cubic capacity: 602 cc
Compression ratio: 8.5 : 1
Effective HP (DIN): 26 HP at 5,500 rpm
Maximum torque (DIN): 3.8 mkg (27.5 ft.lbs.) at 3,500 rpm
Valve gear:
Exhaust valve stem clearance, when cold: 0,15 to 0,20 mm
Inlet valve stem clearance, when cold: 0,15 to 0,20 mm
Fuel system:
Fuel: Premium
Fuel tank capacity: 20 litres (4.4 imp. gal.)
Carburettor: Solex
Lubrication:
After draining: 2,3 litres (4.0 imp. pints)
Ignition:
Static advance setting: 8° engine
Sparking plugs: Series fitted: Marchal 35 - AC 42 F - Eyquem 755 - Bosch W 225 T1 - Champion
L 85 - Marelli CW 7 N BT
Electrode gap: 0,65 to 0,75 mm (0.026" to 0.030")
Gear Ratio
ELECTRICAL SYSTEM
Voltage: 12 V
Alternator: Maximum power: 390 W; Minimum charging speed: 780
rpm
Battery: Capacity: 125/25 Ah. CEI or 150/30 Ah. CEI
|
On: |
"2 CV 4" |
"2 CV 6" |
||
|
1st gear |
0.0348 |
29:1 |
0.0465 |
21.5:1 |
|
2nd gear |
0.0681 |
15:1 |
0.0912 |
10.96:1 |
|
3rd gear |
0.1136 |
8.1:1 |
0.1357 |
7.37:1 |
|
4th gear |
0.1644 |
6:1 |
0.1842 |
5.43:1 |
|
Reverse |
0.0348 |
29:1 |
0.0465 |
21.5:1 |
|
Crownwheel and |
8/33 |
8/33 |
||
Bulb table
|
12 V 45/40 W type "European Dip" |
Dip/Main beam headlamps |
|
12 V 4 W - BA 9 S type T 8/4 |
Front sidelamps |
|
12 V 5 W type R 19/5 |
Rear sidelamps and number plate lighting |
|
12 V 21 W type P 25/1 |
Front and rear direction indicators - brake lamps |
|
12 V 7 W type BA 15 S |
Interior lamp |
|
12 V 2 W - BA 9 S type T 8/2 |
Speedometer lighting |
Fig. 52
Exterior lighting and signals
1 - Dip/main beam headlmaps and front sidelamps
2 - Front direction indicators
3 - Rear direction indicators
4 - Brake lamps
5 - Rear number plate lighting and tail lamps
Replacement parts
Every genuine CITROËN replacement part is sold only through the company's network of dealers.
It is in the interest of the user, for his own safety and for the guarantee, to refuse any other part.
In effect, the fitting of parts or units of different origin could involve him in legal liability if such fitting caused a vehicle to fail to conform to legal requirements of the country concerned, particularly as regards SAFETY, ANTI-POLLUTION, IGNITION INTERFERENCE SUPPRESSION, and NOISE LEVEL.
Furthermore, such fitting would remove from the user any possibility of recourse against the manufacturer.
In particular, items concerned are:
- components of braking systems,
- components of lighting and signalling systems,
- engine components,
- exhaust components,
- steering components,
- structural items,
- suspension components.
[Contents] [Notices] [Important Points] [Driving] [Maintenance] [Minor Repairs] [Miscellaneous Information]