DRIVING

Signals and Visibility

Lights, signals, windscreen wipers, windscreen washers

CONTROL FOR DIRECTION INDICATORS (Fig. 17) Right hand and left hand indicators: move the lever in the direction in which you are going to turn the steering wheel. To cancel the signal, return the lever to its mid-way position. An audible warning device is heard while the indicators are flashing. If it does not work, check the indicators.

Fig. 17 Signalling control 1 - RH direction indicator 2 - LH direction indicator

ELECTRIC WINDSCREEN WIPERS (Fig. 18) To operate: Push the button (1). To stop: Push the button and the wipers will park automatically at the end of their travel.

WINDSCREEN WASHERS (Fig. 18) To operate: Press the button (2). The height of the jet depends on the pressure exerted.

Fig. 18 1 - Electric windscreen wipers 2 - Windscreen washer

LIGHTING AND HORN SWITCH (Fig. 19) Lights out: The lights are out when the side of the knob marked "O" is facing the driver. Side and tail lights: Turn the knob one notch ("V"). Main beam: Turn the knob to the second notch ("R"). Dipped: In "Side and tail" or "Main beam" position, push the lever away from the steering wheel. Horn: Depress the end of the knob (2).

Fig. 19 1 - Switch for hazard warning lamps 2 - Switch for headlamps, side and tail lamps and horn

SWITCH FOR HAZARD WARNING LAMPS (Fig. 19) To operate: Press the switch (1) - the four winkers function. To stop: Press the switch again. This warning device operates even when the ignition is switched off.

[Contents] [Notices] [Important Points] [Driving] [Maintenance] [Minor Repairs] [Miscellaneous Information]