MINOR REPAIRS

Replacing a sparking plug

FACTORY FITTED: AC 42 F BOSCH W 225 T1 EYQUEM 755 MARCHAL 35 CHAMPION L 85 MARELLI CW 7 N BT Electrode gap: .026" to .030" (0.65 to 0.75 mm) (Fig. 47).

Removal: After starting to undo the sparking plug with a plug spanner (wrench), push a rubber tube over the insulator to ease removal. Finish undoing the plug then take it out. Fitting: Cap the insulator of the replacement plug with the rubber tube. Screw in the plug with its tube until finger tight. Finish tightening with the plug spanner (wrench).

Fig. 47 Electrode gap

[Contents] [Notices] [Important Points] [Driving] [Maintenance] [Minor Repairs] [Miscellaneous Information]